Re: ball screws Backlash
Posted by
John Grant
on 1999-06-15 11:16:16 UTC
Dan Mauch wrote:
John Grant
> The regular rolled cut ball screws can get down to aboutI thought that ground screws cost much than an extra $20.
> .002 and save about $20 per axis if that is acceptable. Otherwise the
> additional expense is sure worth it.
> Dan
John Grant
Discussion Thread
TADGUNINC@x...
1999-06-15 07:06:31 UTC
Re: ball screws Backlash
Dan Mauch
1999-06-15 09:26:47 UTC
Re: ball screws Backlash
John Grant
1999-06-15 11:16:16 UTC
Re: ball screws Backlash
Jon Elson
1999-06-15 22:42:08 UTC
Re: ball screws Backlash
TADGUNINC@x...
1999-06-15 22:42:09 UTC
Re: ball screws Backlash
groehm@x...
1999-06-16 04:08:56 UTC
Re: ball screws Backlash