CAD CAM EDM DRO - Yahoo Group Archive

Re: Vac Forming

Posted by Matt Shaver
on 1999-06-15 10:47:08 UTC
> From: MIADsgns@...
>
> Hi Folks:
>
> I am looking for someone to do some vaccum forming of RC micro heli
canopies.
> Looking for 10 units at the moment. I provide the plug (s). Please call me

> or write to me direct. I do not want to go with a large company because of

> the high cost involved for such short order. I am looking for someone that
> knows how to vac form and has descent equipment. Someone that does this
from
> home perhaps? I am pressed for time, otherwise I would vac form the
canopies
> myself. Material has to be lightest available, styrene or similar clear.

One possibility is to find a shop in your area that makes orthopedic braces
or prosthetic limbs. Most of these devices have vacuum formed parts that are
custom made to fit the user, so a lot of ten will be mass production to these
folks! You may have to supply both the forms and material since they may not
stock what you need.

Good Luck,

Matt

Discussion Thread

MIADsgns@x... 1999-06-15 06:44:54 UTC Re: Vac Forming Matt Shaver 1999-06-15 10:47:08 UTC Re: Vac Forming