CAD CAM EDM DRO - Yahoo Group Archive

[CAD_CAM_EDM_DRO] Electrical Enclosures

Posted by Neil
on 2006-02-23 22:15:06 UTC
Jarrett,

I could not find a perfect size enclosure for my project (in aluminum), so I
thought I'd create my own. I came up with this simple design, which is the
milled corner pieces and it will have alum sheet sides. Perhaps a few 'L'
tabs in the middle of the sheet edges for extra support. Should be a fun and
quick mill project, and should be relatively low-cost. This is the corner,
with 1/8" (or thereabouts) slots which to hold the aluminum size panels. Top
and bottom pieces will be screwed on. See here...
http://www.narwani.net/neil/stuff/Enclosure_Corner_01.jpg

Cheers,
-Neil.



On Thursday 23 February 2006 20:06, Jarrett & Heidi Johnson wrote:
> I'm looking for a electrical enclosure. I've seen
> a couple in the past but for whatever reason can't
> find them now after a quick search. I'm looking
> for something like what Dan offers [ from
> Camtronics] however he's told me in the past they
> won't fit the G202's, I'm going to need room for 4
> axis. Anyone got a place to start? I was just
> about to design my own but if I can buy one for
> anywhere near the price I can build it, I'd rather
> do it that way..

Discussion Thread

Jarrett & Heidi Johnson 2006-02-23 18:06:22 UTC [CAD_CAM_EDM_DRO] Electrical Enclosures Robert Campbell 2006-02-23 18:18:02 UTC Re: [CAD_CAM_EDM_DRO] Electrical Enclosures Jarrett & Heidi Johnson 2006-02-23 18:26:32 UTC Re: [CAD_CAM_EDM_DRO] Electrical Enclosures Alan Marconett 2006-02-23 18:37:46 UTC Re: [CAD_CAM_EDM_DRO] Electrical Enclosures mlaws1172 2006-02-23 20:17:33 UTC Re: Electrical Enclosures Neil 2006-02-23 22:15:06 UTC [CAD_CAM_EDM_DRO] Electrical Enclosures vavaroutsos 2006-02-23 23:08:47 UTC Re: Electrical Enclosures JCullins 2006-02-24 05:43:18 UTC Re: [CAD_CAM_EDM_DRO] Electrical Enclosures josef-wagner 2006-02-24 07:02:30 UTC AW: [CAD_CAM_EDM_DRO] Electrical Enclosures