Servo motors for Miill/Drills/3/1 machines
Posted by
Dan Mauch
on 2006-03-26 10:03:21 UTC
I have a batch of New Moog 430 oz in ( Made in the USA) PM DC servo motor
model 23L55-30 with a 250 CPR (1000 PPR in quadrature) encoder. It has a
.315 diameter shaft about 1"Long. These motors are commonly used on full
size round column and square column mill drills and the Sieg X2/3 mill dills
and CNC ready 3/1 machine. These are great motors that will a 3/1 ratio
timing belt drive will give your cnc retrofit a great motor with awesome
speed. I had my retrofit running at 90 IPM with awesome power These are the
same motors that Jeff Davis uses in his excellent Mill Drill Retrofit plans
at .http://www.homecnc.info/plans.htm. Data sheets are available. The motor
has a C23 frame and face mounts but for an additional charge I can supply a
C23 to Nema 23 adapter plate. The motors are rated at 36VDC and 1700 RPM but
can be run at higher voltages. My 36VDC 25A power supply is a perfect match.
See www.camtronics-cnc.com for other motors and this power supply kit. I
also sell Gecko servo control enclosures all set up for Gecko servo amps.
Camtronics has 13year experience with low cost CNC systems and can help you
select the correct motor for your application. These motors are $169 ea plus
s/h . Contact me off line if interested.
Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch
model 23L55-30 with a 250 CPR (1000 PPR in quadrature) encoder. It has a
.315 diameter shaft about 1"Long. These motors are commonly used on full
size round column and square column mill drills and the Sieg X2/3 mill dills
and CNC ready 3/1 machine. These are great motors that will a 3/1 ratio
timing belt drive will give your cnc retrofit a great motor with awesome
speed. I had my retrofit running at 90 IPM with awesome power These are the
same motors that Jeff Davis uses in his excellent Mill Drill Retrofit plans
at .http://www.homecnc.info/plans.htm. Data sheets are available. The motor
has a C23 frame and face mounts but for an additional charge I can supply a
C23 to Nema 23 adapter plate. The motors are rated at 36VDC and 1700 RPM but
can be run at higher voltages. My 36VDC 25A power supply is a perfect match.
See www.camtronics-cnc.com for other motors and this power supply kit. I
also sell Gecko servo control enclosures all set up for Gecko servo amps.
Camtronics has 13year experience with low cost CNC systems and can help you
select the correct motor for your application. These motors are $169 ea plus
s/h . Contact me off line if interested.
Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch