CAD CAM EDM DRO - Yahoo Group Archive

Re: re vac forming

Posted by MIADsgns@x...
on 1999-06-15 21:12:41 UTC
In a message dated 6/16/99 12:42:58 AM SA Eastern Standard Time,
janders@... writes:

<< Rough pumping can be done with a vacuum, and if you want to achieve
higher levels of vacuum, you can make a vacuum pump out of an automotive
air conditioning pump.
If you have a gage and can tell how much vacuum the shop vac can pull,
you can run both at the same time and valve off the shop vac once you
hit it's limit. If you don't, the other pump will be working against it. >>

Any suggestions on buiding the pump with meter, sources for the meters,
hardware etc.? I have a used empty helium tank the type you buy at Toys R-
Us, the instruction s that come with the tank says it can not be used to
refill, can this tank be used for air/vacuum tank? How?
Thanks,

Mario

Discussion Thread

Chris Ellacott 1999-06-15 15:26:17 UTC re vac forming MIADsgns@x... 1999-06-15 20:27:46 UTC Re: re vac forming Jon Anderson 1999-06-15 20:40:37 UTC Re: re vac forming MIADsgns@x... 1999-06-15 21:12:41 UTC Re: re vac forming Tim Goldstein 1999-06-15 21:29:19 UTC Re: re vac forming MIADsgns@x... 1999-06-15 21:45:27 UTC Re: re vac forming Jon Anderson 1999-06-15 21:56:18 UTC Re: re vac forming Tim Goldstein 1999-06-15 22:44:34 UTC Re: re vac forming Tim Goldstein 1999-06-15 22:48:51 UTC Re: re vac forming MIADsgns@x... 1999-06-16 10:49:39 UTC Re: re vac forming MIADsgns@x... 1999-06-16 13:32:48 UTC Re: re vac forming