Re: [CAD_CAM_EDM_DRO] Need servo motors

Try Camtronics . I have quite a few servo motors in quite of different
sizes. I carry the ID23005 which is a nema 23 and rated at 400 oz in peak.
An ID 33003 which rated at 800 oz in peak and the ID33004 rated at 1100 oz
in (14 lb in) and I have some Moog C23L55's and some MOOG 1100 oz in C34
frame motors.
see www.camtronics-cnc.com

Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch

----- Original Message -----
From: "vonswarrior" <vonswarrior@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, May 17, 2006 2:12 PM
Subject: [CAD_CAM_EDM_DRO] Need servo motors


> Hi everyone
>
> I need a supplier for servo motors, any suggestions
>
> Thank you
> Henry
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>