CAD CAM EDM DRO - Yahoo Group Archive

Re: Intro

Posted by Dan Mauch
on 1999-05-09 11:57:11 UTC
type it is www.teachcnc.com
-----Original Message-----
Dan
From: Brian Fairey <bfairey@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Sunday, May 09, 1999 8:55 AM
Subject: Re: [CAD_CAM_EDM_DRO] Intro


>From: Brian Fairey <bfairey@...>
>
>Dan cant find www.teachnc.com
>Brian.
>
>Dan Mauch wrote:
>
>> From: "Dan Mauch" <dmauch@...>
>>
>> Welcome to the group. I visited Perth/Fremantle about 10 years ago. Loved
>> the Aussies I met.
>> I have retofitted my 8x36 200mmX900mm vertical mill to a servo CNC
system.
>> First, it used some 2.4 amp drivers with a 450 oz in steppe r motors.
Then
>> I built 5 amp drivers for it then converted it to the present servo
system.
>> Milling a 3" diameter bore with a 3/8" end mill is a joy.
>> I would start by d/ling a dempo copy of Desknc for Dos at www.deskam.com
>> This is a fine low cost G code interpreter. You can also go to
>> www.teachnc.com and read about G code instructions. From there it it a
>> simple mater to convert autocad dxf files to G code. There are sveral
free
>> program that do that. last you need to learn about various stepper
>> motor/servo systems and how they work and what their limitations are.
>> You will also want to visit www.metalworking.com for other pictures of
cnc
>> retofits information. While there d/l a copy of Stepster for a free G
code
>> interpreter.
>> Dan
>>
>> ------------------------------------------------------------------------
>> ONElist: Where Star Wars fans unite!
>> http://www.onelist.com
>> Find your Star Wars list today!
>> ------------------------------------------------------------------------
>> welcome to CAD/CAM/EDM/DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
>
>
>------------------------------------------------------------------------
>Did you know that
>http://www.ONElist.com
>More than 3.5 million people are using ONElist?
>------------------------------------------------------------------------
>welcome to CAD/CAM/EDM/DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
>

Discussion Thread

Jon Elson 1999-05-06 15:33:31 UTC Intro Russell Dunn 1999-05-08 18:22:43 UTC Intro Dan Mauch 1999-05-09 07:00:20 UTC Re: Intro Brian Fairey 1999-05-09 08:52:20 UTC Re: Intro Dennis Mino 1999-05-09 10:30:55 UTC Re: Intro Dan Mauch 1999-05-09 11:57:11 UTC Re: Intro