Chattering Lathe
Posted by
danieltmedlin
on 2006-06-19 19:25:14 UTC
I have a Logan bench lathe with a chattering problem. I removed the
grease in the spindle bearing, and repacked it. The bearing was
perfectly smooth. I tightened up the saddle table, the cross feed, and
compound ways.
It chatters in both directions, whether I am turning or facing.
I have heard of an anti-chatter belt, has anyone used one if it.
Any recommendations needed.
Daniel T. Medlin
grease in the spindle bearing, and repacked it. The bearing was
perfectly smooth. I tightened up the saddle table, the cross feed, and
compound ways.
It chatters in both directions, whether I am turning or facing.
I have heard of an anti-chatter belt, has anyone used one if it.
Any recommendations needed.
Daniel T. Medlin