Re: [sherline] Re: Subject: DRO accuracy
Posted by
wanliker@a...
on 2000-07-10 10:06:20 UTC
In a message dated 7/10/00 8:32:28 AM Mountain Daylight Time,
ginger@... writes:
<<
Adding 2 digital calipers to a Sherline would cost well under $200 and
would provide the same kind of accuracy.
there latest flyer:
Vertical Digital Machine Scale: 4 inch---$69, 6 inch---$79, 12 inch---$110.
Horizontal Digital Machine Scale: 4 inch---$59, 6 inch---$64, 12 inch---$95.
These units are based on the caliper type bars and readouts, but have end
mounts, and the readings are either Horizontal or Vertical.
Resolution is: .0005/.01mm, Repeatability: .005/.01mm, inch/mm conversion,
zero reset, plus/minus buttons with output. Chrome Clad scale.
Hope this is of interest to some,
bill
ginger@... writes:
<<
Adding 2 digital calipers to a Sherline would cost well under $200 and
would provide the same kind of accuracy.
>>Wholesale Tool, wtind@..., 1-800-551-2251. Has the following listed in
there latest flyer:
Vertical Digital Machine Scale: 4 inch---$69, 6 inch---$79, 12 inch---$110.
Horizontal Digital Machine Scale: 4 inch---$59, 6 inch---$64, 12 inch---$95.
These units are based on the caliper type bars and readouts, but have end
mounts, and the readings are either Horizontal or Vertical.
Resolution is: .0005/.01mm, Repeatability: .005/.01mm, inch/mm conversion,
zero reset, plus/minus buttons with output. Chrome Clad scale.
Hope this is of interest to some,
bill