Re: programs to write G-code

Pretty slick Jon.

I for one an pretty impressed with your talents. machinist, programmer,
electronic designer. You put us mere mortals to shame.

Thanks for sharing your hard work.


Tim
[Denver, CO]

> -----Original Message-----
> From: Jon Elson [mailto:jmelson@...]
> Sent: Tuesday, June 15, 1999 11:27 PM
> To: CAD_CAM_EDM_DRO@onelist.com
> Subject: Re: [CAD_CAM_EDM_DRO] programs to write G-code
>
>
> From: Jon Elson <jmelson@...>
>
> I have put some programs that write G-Code for common
> machining operations on my web page. Take a look at
> http://ascc.artsci.wustl.edu/~jmelson/gcode.html
>
> The programs are in C, and I've made them as portable as
> I can. They should run undel Linux with Gcc, or with
> MS-DOS and the Microsoft C compiler, or Windows xx,
> with Borland C. If you have trouble with them, let me know.
>
> I will be adding some more programs as soon as I get them
> converted.
>
> Jon
>
>
> ------------------------------------------------------------------------
> ONElist members are using Shared Files in great ways!
> http://www.onelist.com
> Are you? If not, see our homepage for details.
> ------------------------------------------------------------------------
> welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for
> the discussion of shop built systems in the above catagories.
> To Unsubscribe:
> http://www.onelist.com/unsubscribe/CAD_CAM_EDM_DRO
> bill, List Manager
>