Re: [CAD_CAM_EDM_DRO] good pricing for linear rails and blocks?
Posted by
Robert Colin Campbell
on 2006-08-17 16:12:21 UTC
David,
I bought 4 52" 25 mm THK rails and six blocks for $500 which I though was a
good price.
I also sell new Hiwin rails and blocks at a good price.
Robert Colin Campbell
Bob Campbell Designs
www.Campbelldesigns.com
Mach 2/3 breakout boards
Relay boards
Spindle Speed boards
Stepper motors
Plasma Torch Height control
I bought 4 52" 25 mm THK rails and six blocks for $500 which I though was a
good price.
I also sell new Hiwin rails and blocks at a good price.
Robert Colin Campbell
Bob Campbell Designs
www.Campbelldesigns.com
Mach 2/3 breakout boards
Relay boards
Spindle Speed boards
Stepper motors
Plasma Torch Height control
----- Original Message -----
From: "figNoggle" <david@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, August 17, 2006 4:42 PM
Subject: [CAD_CAM_EDM_DRO] good pricing for linear rails and blocks?
>
> hi all-
>
> i'm seeing quite a few ebay auctions for thk/ino/nsk/thomson linear rails
> and
> blocks which end up being sold for roughly $150 usually of the 20-25mm
> variety with 2 blocks per rail. the blocks are also usually of the
> retained bearing type so they don't scatter all over the floor when
> removed from the rail.
>
> is $150 or so a fair price? from what i've gathered, blocks seem to be
> ~$100 new and rails of 20"-30" also price similarly.
>
> thanks!
> david
>
>
>
> ACME Screw & Acetal/Delrin Kit <http://www.fignoggle.com/kits/acmekit.htm>
> Harbor Freight 10%, 20% and ENCO Free Shipping Coupons
> <http://www.superx3.com/forums/viewforum.php?id=15>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Discussion Thread
figNoggle
2006-08-17 14:51:05 UTC
good pricing for linear rails and blocks?
Robert Colin Campbell
2006-08-17 16:12:21 UTC
Re: [CAD_CAM_EDM_DRO] good pricing for linear rails and blocks?