Denford Easimill Spare Parts Available
Posted by
xj5373
on 2006-09-10 14:28:14 UTC
Hi,
I have decided to install a new control system in my Denford Easimill
(Mach 3, Geckos etc) and have very carefully removed a number of
original parts from the machine thinking that other owners might be
interested in getting hold of some spares? For simplicity I have
listed the parts on Ebay, search for Denford.
I have listed the Digiplan stepper drivers, the screen, the PNC3
Interface card and the Processor keyboard card including VDU board.
At the time I started dismantling everything was working and I have
been very carefull so I would expect the parts to be in good shape.
Hope that this gives someone some help.
Ian
PS I also have a brand new casette tape just bought (at great
expense!) from North East Electronics if anone is interested.
I have decided to install a new control system in my Denford Easimill
(Mach 3, Geckos etc) and have very carefully removed a number of
original parts from the machine thinking that other owners might be
interested in getting hold of some spares? For simplicity I have
listed the parts on Ebay, search for Denford.
I have listed the Digiplan stepper drivers, the screen, the PNC3
Interface card and the Processor keyboard card including VDU board.
At the time I started dismantling everything was working and I have
been very carefull so I would expect the parts to be in good shape.
Hope that this gives someone some help.
Ian
PS I also have a brand new casette tape just bought (at great
expense!) from North East Electronics if anone is interested.