Re: [CAD_CAM_EDM_DRO] Re: New CNC router released

Dennis,

Thanks for the advice. The website is still a bit rough yet. Many changes to be made. All those test videos should be replaced.

Ron

http://romaxxcnc.com

Dennis Schmitz <denschmitz@...> wrote:
Well, if I noticed it, then other people will too. You might want to
add that text right next to the video link so it doesn't cost you
sales, at least until you get another video up.

On 9/22/06, R Rogers <rogersmach@...> wrote:
>
> Dennis,
>
> As the caption says "Taken during testing". Yes it did leave a burr
> between iterations. The cause was deflection. The solution was the addition
> of another linear rail on the back side of the bridge and cam followers. If
> you click on the Photos page you'll see that the additional linear rail
> solved it.
>
> I'll try to shoot some new video this weekend. Very busy now.
>
> Thanks, Ron
>
>
> Dennis Schmitz <denschmitz@...> wrote:
> I noticed one thing on the video of milling out a cavity. There
> was a
> burr in the cavity between the first pass and the second pass. It
> seemed to me that the second pass would have cut even with the first
> pass. What did this come from? Did the piece move?
>
> On 9/22/06, R Rogers <rogersmach@...> wrote:
> > Hi Chris,
> >
> > Thanks for the nice compliments.
> >
> > Getting a very good response from the CNC community. It was a long
> > development and the end result was definitely worth the investement. Like
> > the base/table for instance, one could literally park a pick-up truck on
> it.
> > Very strong and stable.
> >
> > Ron
> >
> >
> > lcdpublishing <lcdpublishing@...> wrote:
> > Hey Ron,
> >
> > Glad to see you released your router! After seeing those VERY
> > IMPRESSIVE videos you posted here a few months back, I have been
> > anxious to see you get the machine on the market.
> >
> > It's good to see high quality machines like that comming into
> > the "hobbiest" market, and a good price point too I might add.
> >
> > There is so much junk in the form of plans and such that I think many
> > people get turned off to CNC. After all, it can be very frustrating
> > spending money on plans, building a machine, then in the end find out
> > it only runs during days with low humidity or some other such problem.
> >
> > Anyway, good luck with it and I am sure you will be getting plenty of
> > orders from people looking for a high quality machine tool.
> >
> > Chris
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> > timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> > [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if
> > you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> > sister site to the CCED group, as many of the same members are there, for
> OT
> > subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> > DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>





[Non-text portions of this message have been removed]