Re: [CAD_CAM_EDM_DRO] Re: 2 1/4 Makita Router
Posted by
Ken Campbell
on 2006-10-09 19:18:53 UTC
----- Original Message -----
From: <fortyfingers@...>
Subject: [CAD_CAM_EDM_DRO] Re: 2 1/4 Makita Router
> Somewhat related but slightly off topic is machining aluminum with the
> router. Does anyone know of a good place to go to, to get info about
feed
> speeds, depth of cut and cutters for this? I have a couple of
modifications I'd
> like to make to my frame to allow working beyond the end of the x axis so
that
> Sam
*********
I would start conservatively with a " mounted router " ... aluminum doesn[t
work harden much, so how about starting with 1/2 thousands per cutting tooth
per revolution ........, and 1/2 diameter of tool deep. that will probably
kick out a lot of Al-tinfoil, but heck that's what routers do ....
If everything feels and sounds smooth, you could work up to 1 thousandsth
per cutting tooth per revolution, and 1 diameter deep.
That doesn[t sound like much, but it will be moving right along. the limit
probably will be your rigidity of the mounting;also real small router pins
( 1/8 inch... ) have very little " body " left, because it takes big flutes
to clear the chips ...
I like MA Ford routing burrs and cutters ... be sure your cutter pin
allows plunging, if you are going to be plunging.
just some trivia, ken campbell, deltawerkes
Wear safety glasses !!!! (g) ....
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.13.1/469 - Release Date: 10/9/2006
Discussion Thread
vrsculptor
2006-10-09 06:32:54 UTC
2 1/4 Makita Router
Robert Colin Campbell
2006-10-09 10:55:03 UTC
Re: [CAD_CAM_EDM_DRO] 2 1/4 Makita Router
Satchid
2006-10-09 11:06:38 UTC
RE: [CAD_CAM_EDM_DRO] 2 1/4 Makita Router
fortyfingers@a...
2006-10-09 16:49:19 UTC
Re: 2 1/4 Makita Router
Darren Lucke
2006-10-09 16:55:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2 1/4 Makita Router
JCullins
2006-10-09 17:14:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2 1/4 Makita Router
Ken Campbell
2006-10-09 19:18:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: 2 1/4 Makita Router
Steve Stallings
2006-10-09 19:25:17 UTC
Re: 2 1/4 Makita Router
Satchid
2006-10-09 22:17:29 UTC
RE: [CAD_CAM_EDM_DRO] Re: 2 1/4 Makita Router
wthomas@g...
2006-10-09 22:21:19 UTC
W.E.T. Re: 2 1/4 Makita Router