CAD CAM EDM DRO - Yahoo Group Archive

Re: Protecting lead screws

Posted by kz1927
on 2006-11-09 11:21:12 UTC
Not huge ...but cheap

http://littlemachineshop.com/products/product_view.php?ProductID=1431

John


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bill Davis" <wdavis364@...>
wrote:
>
> Thanks for the responses, you're right, they are high. McMaster-Carr
had them 12 inches wide for $28 a foot. Too rich for me.
> thanks
> bill
>
>
>
> ----- Original Message -----
> From: Jon Elson
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Sent: Thursday, November 09, 2006 11:53 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Protecting lead screws
>
>
> wdavis364 wrote:
>
> >The material that is used to protect lead screws from shavings,
what is
> >it called? Where can I find this material?
> >
> >
> Goretite, see http://www.gortite.com/
>
> Be sitting down when you get a price on this stuff. It runs something
> close to
> $100 a foot!
>
> Jon
>
>
>
>
> [Non-text portions of this message have been removed]
>

Discussion Thread

wdavis364 2006-11-09 05:00:53 UTC Protecting lead screws Jon Elson 2006-11-09 09:58:45 UTC Re: [CAD_CAM_EDM_DRO] Protecting lead screws JanRwl@A... 2006-11-09 10:05:19 UTC Re: [CAD_CAM_EDM_DRO] Protecting lead screws Bill Davis 2006-11-09 11:00:41 UTC Re: [CAD_CAM_EDM_DRO] Protecting lead screws kz1927 2006-11-09 11:21:12 UTC Re: Protecting lead screws kz1927 2006-11-09 12:33:30 UTC Re: Protecting lead screws Bill Davis 2006-11-09 12:35:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Protecting lead screws Bill Davis 2006-11-09 13:12:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Protecting lead screws Tony Jeffree 2006-11-09 14:29:02 UTC Re: [CAD_CAM_EDM_DRO] Protecting lead screws