CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Harrison Lathe machine TRAINER 280 CNC

Posted by Terry Owens
on 2006-11-25 07:20:40 UTC
Hi,

I have the same machine but with the later Ver 3.0 operating system software. You have two choices. Try to obtain the hardware via one of the homeshop machinist sites:

http://www.homeworkshop.org.uk/

You might be lucky as I was recently and bought the complete electronics system off someone who wanted to strip off the CNC and make the machine just for manual turning.

The second option, which I will use if my machine electronics fail and I can't get the parts to repair it, is to strip it all out and swap it over to a modern PC, Gecko/Rutex drives and driver software such as Turbo CNC or Mach **.

You will not get any help from Harrison as there are few people left working there that know anything about this machine.

I have some spares that I am not going to use if you can send me a photograph, off-list, of what you want I'm sure we can come to some arrangements.

Regards,

Terry




Dear Friends,

I have a Harrison Lathe machine TRAINER 280 CNC/Manual. The e-prom
software of its drive card has damedged accidently. The drive card has
made by "BRADFORD INSTRUMENTS LTD. 060/04 1986 England", the 64k eprom
IC # is TMS2764-25JL and the label on the IC is "Lathe(m)
Ver.2.02". I can send all required pictures (machine, Drive Card, E-
prom IC etc.) Can some one help me in this regard. I shell be very
thankfull for any piece of guide or help.

Best Regards
Zahid
creativedge786@...



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links






[Non-text portions of this message have been removed]

Discussion Thread

Zahid Liaqat 2006-11-24 22:58:10 UTC Harrison Lathe machine TRAINER 280 CNC Terry Owens 2006-11-25 07:20:40 UTC Re: [CAD_CAM_EDM_DRO] Harrison Lathe machine TRAINER 280 CNC