Re: MaxNC modifications

I can remember. Take a look at you doc that you got with your oem650 and
checking the pulse width for a step. Then call AH-HA and they will tell you
what the set up menu function is for that. It's been 5 years since I ran
into that problem.
Dan
-----Original Message-----
From: Jon Anderson <janders@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Wednesday, June 16, 1999 6:46 AM
Subject: Re: [CAD_CAM_EDM_DRO] MaxNC modifications

>From: Jon Anderson <janders@...>
>
>Dan Mauch wrote:
>> On the Ah-Ha software there can be a problem. I had one customer that had

my

>> 2 amp drivers and ran into a problem with lost steps. We finally figured

out

>> that there is a timimng set up in the ah-ha set menu. We increased the

time

>> and the prblem went away.
>
>Dan,
>
>If you ever happen to remember what parameter it was you changed, could
>you let me know? I'd be eternally grateful.
>While I feel it's software, there are too many people using Ah-ha
>commercially for this to not have a fix. It's just finding that fix....
>
>Thanks,
>
>Jon
>
>------------------------------------------------------------------------
>Looking to expand your world?
>http://www.onelist.com
>ONElist has 170,000 e-mail communities from which to choose!
>------------------------------------------------------------------------
>welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe:
> http://www.onelist.com/unsubscribe/CAD_CAM_EDM_DRO
>bill, List Manager
>