Re: [CAD_CAM_EDM_DRO] 14x40 lathe conversion

I'd like to see them as well.

----- Original Message -----
From: Dan Mauch
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Friday, February 02, 2007 6:40 AM
Subject: Re: [CAD_CAM_EDM_DRO] 14x40 lathe conversion


I helped one of my customers retrofit his 1450 Grizzly lathe. We reused the
existing X and Z axis leadscrews. I can email you pictures off line.

Dan Mauch
low cost stepper and servo motors.
cases for Gecko drives
kits and assembled 3-4 axis drives
www.camtronics-cnc.com
www.seanet.com/~dmauch
----- Original Message -----
From: "Polaraligned" <polaraligned@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, February 01, 2007 4:28 PM
Subject: [CAD_CAM_EDM_DRO] 14x40 lathe conversion

> Can't help it. I have the bug.
> Now that my BP is closing in on
> completion I am thinking about
> gathering what I need to do my lathe.
> It is a Grizzly 14x40.
> My question is mounting the ballscrews.
> I guess I can machine a block to hold
> the ballnut on the carriage- behind the
> carriage apron- where the ACME threading
> screw is. Then mount the ballscrew's
> right end in a block with a pair of angular
> contact bearings holding it in place.
> Now is it just best to let the left end
> of the ballscrew just float?
> The legnth of ballscrew I need is over 50".
> What diameter is appropriate?
> Anyone have any pictures of a conversion of a
> lathe like this?
>
>
> Thanks,
> Scott
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>





[Non-text portions of this message have been removed]