Re: [CAD_CAM_EDM_DRO] Step & Direction for Bridgeport Boss 3/4/5/6

I have been making and selling just such a control for these machines for
over six years. It gives you a FANUC compatible PC control with the ability
to run LARGE programs. It is basically a plug in system that replaces the
old control with just some minor rewiring of the limit switches. For more
info, go to http://www.machinemaster.com
Darrell

----- Original Message -----
From: "Roland Friestad" <cardinal.eng@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Wednesday, July 26, 2000 6:13 AM
Subject: [CAD_CAM_EDM_DRO] Step & Direction for Bridgeport Boss 3/4/5/6


> To the group -
>
> I'd be glad to hear from any of you guys who have converted Bridgeport CNC
> mills to run on step and direction signals using the existing Bridgeport
> drivers - Either on or off list -
>
> I"ve been fooling with these things for a long time now but have always
just
> removed the whole Bridgeport control and replaced it with a new one so
I've
> never taken the time to go at it this way - If those of you who have would
> share the info it would be appreciated -
>
> Related to that - I've got lots of Bridgeport circuit boards,
transformers,
> complete controls, etc, etc, that could be used to work out some sort of a
> trade for assistance - Besides, I need to clean out the shop again and
hate
> to just scrap out this stuff -
>
> Roland
>
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>