Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
Posted by
David G. LeVine
on 2007-05-02 11:03:52 UTC
At 04:33 PM 5/1/2007, you wrote:
David G. LeVine
Nashua, NH 03060
>Consider buying a replacement part from Grizzly or any company thatWell, at least knowing that a replacement is available is a good thing.
>sells that exact mill. then you are not modifying the original part.
>
>Of course, since you will never use the original again, why not just
>modify that ?
David G. LeVine
Nashua, NH 03060
Discussion Thread
arquibaldo2001
2007-04-28 08:18:36 UTC
Z-axis CNC conversion on a mill-drill: a challenge (long)
R Wink
2007-04-28 09:09:44 UTC
RE: [CAD_CAM_EDM_DRO] Z-axis CNC conversion on a mill-drill: a challenge (long)
Dan Mauch
2007-04-28 09:53:12 UTC
Re: [CAD_CAM_EDM_DRO] Z-axis CNC conversion on a mill-drill: a challenge (long)
arquibaldo2001
2007-04-28 11:39:23 UTC
Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
Dan Mauch
2007-04-28 13:15:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
arquibaldo2001
2007-04-28 19:36:20 UTC
Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
WT
2007-04-28 21:46:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
ballendo
2007-04-29 05:08:01 UTC
Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
Dan Mauch
2007-04-29 07:28:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
David G. LeVine
2007-04-29 11:30:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
WT
2007-04-29 18:16:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
Dan Mauch
2007-04-30 07:55:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
WT
2007-04-30 09:01:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
ballendo
2007-04-30 20:27:39 UTC
Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
WT
2007-04-30 20:53:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
turbulatordude
2007-05-01 13:38:01 UTC
Re: Z-axis CNC conversion on a mill-drill: a challenge (long)
David G. LeVine
2007-05-02 11:03:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Z-axis CNC conversion on a mill-drill: a challenge (long)