CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] BOXFORD 165 HMC

on 2007-09-29 04:22:01 UTC
Robert,
The company I work for specializes in retrofitting OpenCNC to machine tools. We create an electrical schematic as part of the retrofit process. Alternatively, we could put you in contact with some UK based OpenCNC Value Added Resellers. If you want to do the retrofit yourself, we could assist.

Tompkins.Robert I have recently acquired a Boxford 165 Horizontal Machining Centre. Unfortunately it has no controller (should be BBC or IBM pc) and no connection information. Can anyone provide information or experience of connecting or upgrading one of these machines?






Thanks,



Jim Peck,

USA+ 1-616-My-OpenC

USA+ 1-616-696-7362

jimPeck@...









1-248-765-3836 After Hours OpenCNC Hotline






--------------------------------------------------------------------------------



[Non-text portions of this message have been removed]

Discussion Thread

tompkins.robert 2007-09-28 19:09:18 UTC BOXFORD 165 HMC Jim Peck Stamping 2007-09-29 04:22:01 UTC Re: [CAD_CAM_EDM_DRO] BOXFORD 165 HMC Wayne Weedon 2007-09-29 06:49:37 UTC Re: [CAD_CAM_EDM_DRO] BOXFORD 165 HMC