Re: Cold rolled steel, flats or square for use as rails.
Posted by
apples0_17
on 2008-08-08 18:19:03 UTC
Will only be designing gantry as single side drive. Round figures,
gantry will be about 5ft wide, in shape of triangle. Bearings will be
mounted on a truck/carrage that is say 2ft long. Table size 4'x4'.
Will either use those concave type bearings or normal flat bearings.
Will be for a slow moving gas cutting table. No fast speeds.
Rails dimentions rough idea either square 1"x1" or flat 1/2"x3".
gantry will be about 5ft wide, in shape of triangle. Bearings will be
mounted on a truck/carrage that is say 2ft long. Table size 4'x4'.
Will either use those concave type bearings or normal flat bearings.
Will be for a slow moving gas cutting table. No fast speeds.
Rails dimentions rough idea either square 1"x1" or flat 1/2"x3".
Discussion Thread
apples0_17
2008-08-08 16:30:24 UTC
Cold rolled steel, flats or square for use as rails.
stan
2008-08-08 16:59:48 UTC
Re: [CAD_CAM_EDM_DRO] Cold rolled steel, flats or square for use as rails.
apples0_17
2008-08-08 17:19:14 UTC
Re: Cold rolled steel, flats or square for use as rails.
stan
2008-08-08 17:55:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cold rolled steel, flats or square for use as rails.
apples0_17
2008-08-08 18:19:03 UTC
Re: Cold rolled steel, flats or square for use as rails.
Leslie Newell
2008-08-08 22:35:30 UTC
Re: [CAD_CAM_EDM_DRO] Cold rolled steel, flats or square for use as rails.
Leslie Newell
2008-08-08 22:39:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cold rolled steel, flats or square for use as rails.
cnc002@a...
2008-08-09 09:26:13 UTC
Re: [CAD_CAM_EDM_DRO] Cold rolled steel, flats or square for use as rails.
Michael Fagan
2008-08-09 15:07:59 UTC
Re: [CAD_CAM_EDM_DRO] Cold rolled steel, flats or square for use as rails.
turbulatordude
2008-08-09 20:26:43 UTC
Re: Cold rolled steel, flats or square for use as rails.
turbulatordude
2008-08-09 20:31:12 UTC
Re: Cold rolled steel, flats or square for use as rails.
William J Weder
2008-08-12 10:33:31 UTC
RE: [CAD_CAM_EDM_DRO] Cold rolled steel, flats or square for use as rails.
David G. LeVine
2008-08-12 16:40:19 UTC
Re: [CAD_CAM_EDM_DRO] Cold rolled steel, flats or square for use as rails.