Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Posted by
Leslie Newell
on 2009-02-12 15:57:20 UTC
> Easy to make a 34 to 42 adapter plate for the stepper. 34 mount holesOnce you have done that the pulley needs to be modified to fit the
> drilled and tapped with offset 45 degrees to 42 mount holes. Bolt to 34
> and you got one with a 42 flange ;)
>
different shaft diameter. Then the belt won't line up because of the
thickness of the adapter plate...
I would rather stick to a simple bolt-in replacement if possible.
Les
Discussion Thread
Leslie Newell
2009-02-11 02:56:12 UTC
Source of NEMA 42 steppers in the UK
Steve Blackmore
2009-02-11 11:07:30 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Leslie Newell
2009-02-11 16:46:13 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Steve Blackmore
2009-02-12 00:21:44 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Leslie Newell
2009-02-12 01:00:54 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Russell Dunn
2009-02-12 03:39:23 UTC
Re: Source of NEMA 42 steppers in the UK
Steve Blackmore
2009-02-12 12:57:49 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Leslie Newell
2009-02-12 15:57:20 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK
Steve Blackmore
2009-02-12 16:57:40 UTC
Re: [CAD_CAM_EDM_DRO] Source of NEMA 42 steppers in the UK