CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Synchronous vs stepper

Posted by John Grant
on 2000-08-08 11:06:14 UTC
Mariss Freimanis wrote:
>
> Hi, A 200 step motor (1.8 deg) can be run directly from a 50 or 60 Hz
> supply. What is needed is a capacitor in series with one winding to
> phase shift the AC 90 deg relative to the other winding. At 50 Hz
> this gives 60 RPM and at 60 Hz it gives 72 RPM. Step motors intended
> for 115 VAC operation have a high inductance to limit phase current
> to the correct value at 50 / 60 Hz.

60 cycle 115 VAC produces high inductance in the windings of a motor.

John Grant

Discussion Thread

James Owens 2000-08-08 10:26:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Synchronous vs stepper John Grant 2000-08-08 11:06:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Synchronous vs stepper wanliker@a... 2000-08-08 12:06:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Synchronous vs stepper John Grant 2000-08-08 13:07:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Synchronous vs stepper