Re: Grizzly 8689 tram
Posted by
Chuck Merja
on 2010-12-10 13:01:07 UTC
I see a tram unit -
<http://littlemachineshop.com/products/product_view.php?view=classic
<http://littlemachineshop.com/products/product_view.php?view=classic&Product
ID=3651> &ProductID=3651> and a review of same
http://www.cartertools.com/nanotram.html - has anyone got some experience
with this device?
And I'd love some feedback from others on the other questions below, please.
C
Chuck Merja
Well the recent videos on Tormach attachments have created some questions,
cuz I have recently acquired an 8689 that someone else CNC'd with ACMEs, and
I'm pretty sure that I could not produce the attachments shown in the
videos, due to alignment and backlash. Here are a couple questions that
occur to me...
1 - how do you tram and maintain tram of these units? It looks to me like
there should be a turnbuckle from an outrigger leg up to the column that
would help adjust and maintain tram.
2- My unit has 276 oz-in steppers on X n Y and when I tighten the gibs
enough to take the slop out of those tables, the steppers miss steps. Do I
just need higher torque steppers, or ??
3 - The drill chuck holder in the video looks pretty interesting, although
it looks like it could be subject to ongoing axis alignment errors. But
maybe there is a clever way to align those axises?? I know boring the final
holes would help with this, but we are still subject misalignments, altho
they would result in a tapered hole, not one offset.
4 - What other attachments have folks found useful for their CNC'd mini
mills.
thanks, Chuck
[Non-text portions of this message have been removed]
<http://littlemachineshop.com/products/product_view.php?view=classic
<http://littlemachineshop.com/products/product_view.php?view=classic&Product
ID=3651> &ProductID=3651> and a review of same
http://www.cartertools.com/nanotram.html - has anyone got some experience
with this device?
And I'd love some feedback from others on the other questions below, please.
C
Chuck Merja
Well the recent videos on Tormach attachments have created some questions,
cuz I have recently acquired an 8689 that someone else CNC'd with ACMEs, and
I'm pretty sure that I could not produce the attachments shown in the
videos, due to alignment and backlash. Here are a couple questions that
occur to me...
1 - how do you tram and maintain tram of these units? It looks to me like
there should be a turnbuckle from an outrigger leg up to the column that
would help adjust and maintain tram.
2- My unit has 276 oz-in steppers on X n Y and when I tighten the gibs
enough to take the slop out of those tables, the steppers miss steps. Do I
just need higher torque steppers, or ??
3 - The drill chuck holder in the video looks pretty interesting, although
it looks like it could be subject to ongoing axis alignment errors. But
maybe there is a clever way to align those axises?? I know boring the final
holes would help with this, but we are still subject misalignments, altho
they would result in a tapered hole, not one offset.
4 - What other attachments have folks found useful for their CNC'd mini
mills.
thanks, Chuck
[Non-text portions of this message have been removed]