Re: [CAD_CAM_EDM_DRO] Tool radius compensation

My feeling is the CAM should work it out.
Like; mill this part out with a 4mm end bit to the tolerance that I've set.

But I'm not a machine shop....

Roland

On 6 April 2011 20:42, Les Newell <les.newell@...> wrote:

>
>
> When using tool compensation with CAM it is possible to either to get
> the CAM to create tool paths that follow the part outline, making the
> control compensate for the whole tool radius or follow the tool tool
> center line with the control just compensating for wear. Which is more
> commonly used?
>
> Les
>
>


[Non-text portions of this message have been removed]