RE: [CAD_CAM_EDM_DRO] Announcing- NFS Turn wizard for Mach3

Ron,

Will this be included in the next NFS update or will it always be a separate
install?



Thanks,

Andrey

www.EssexJewelers.com



From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Ron Ginger
Sent: Tuesday, November 08, 2011 6:11 PM
To: Mach3Start@yahoogroups.com; SherlineCNC@yahoogroups.com;
CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Announcing- NFS Turn wizard for Mach3





I am pleased to announce the Newfangled Solutions NFS Turn package.

NFS turn is a conversational or interactive package. Its aimed at the
toolroom kind of lathe work- making things like bolts, bushings, shafts,
etc. You choose from a menu of common lathe operations, like turn, face,
thread, chamfer, drill, bore, etc. Each operation presents a simple
screen where you fill in the blanks for the operation you want.

A unique feature of NFS turn is the ability to do an immediate
operation. When you have filled in the blanks, you have two buttons- "Do
IT" and "Add to File". The Do It button will immediately run the
operation. Add to File will let you build a complex part composed of
many operations.

There is a Youtube video of an earlier version of the wizard at
http://www.youtube.com/watch?v=wfBluCFDuAg I will be replacing this with
an update as soon as possible.

NFS turn operates under the same license as the Mill Addons, so if you
already have an NFS license you are good to go. If not see the links
above to purchase a license. NFS turn will work in demo mode, but it
wont save a file.

The wizard is posted on the machsupport forum at
http://www.machsupport.com/forum/index.php/topic,20001.0.html

Id like to keep bug reports on the forum.

ron ginger





[Non-text portions of this message have been removed]