CAD CAM EDM DRO - Yahoo Group Archive

Re: Homemade MPG

on 2012-05-04 03:38:19 UTC
I have a CAMM3 machine made by Roland. it has a pulse wheel that is manaual. when you spin it, the encoder wheel sends out pulses and moves the axis. the best part is that the machine has a readout so that it displays the distance.

I think it has 90 some pulses for each full rotation. there is also a pair of buttons for rapid.

here is a guy who has one.
http://www.mycncuk.com/forums/showthread.php/4106-Roland-CAMM3-PNC-3000-Desktop-Mill

you can see the MPG system, one wheel for each axis, and the readouts.

it is a nice machine. if you have a MPG, it is a VERY nice addition. especially when there are no handles.

Dave


--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Bob" <cad2gcode@...> wrote:
>
> Sorry, I should have said what it is. Its Manual plulse Generator. In my case its Rotary Encoder used in CNC to jog the machine to XYZA positions.
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude" <dave_mucha@> wrote:
> >
> > I am guessing it is a manual pulse generator
> > but that is only a guess. I did not see any manual parts on that to indicate such.
> >
> > Dave
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, Ron Thompson <ron@> wrote:
> > >
> > > On 5/3/2012 4:57 PM, Bob wrote:
> > > > Hi to All,
> > > > This video shows how the MPG works on a Lathe, but works just as well
> > > > on a Router.
> > > > http://youtu.be/oKGabw603x0
> > > > You can download a PDF on how to make one here.
> > > > http://www.cad2gcode.com/cncprojects
> > > > Cheers
> > > > Bob
> > > It might be helpful to state what an MPG is. Google says miles per gallon.
> > >
> > > --
> > >
> > >
> > > Ron Thompson
> > > On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
> > >
> > > Think, Draw, Print. 3D printers ROCK!
> > >
> > > http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/
> > >
> > > http://www.plansandprojects.com My hobby pages are here:
> > > http://www.plansandprojects.com/My%20Machines/
> > >
> > > Visit the castinghobby FAQ:
> > > http://castinghobbyfaq.bareboogerhost.com/
> > >
> >
>

Discussion Thread

Bob 2012-05-03 13:57:29 UTC Homemade MPG Ron Thompson 2012-05-03 15:08:30 UTC Re: [CAD_CAM_EDM_DRO] Homemade MPG turbulatordude 2012-05-03 16:20:47 UTC Re: Homemade MPG Bob 2012-05-03 17:24:18 UTC Re: Homemade MPG turbulatordude 2012-05-04 03:38:19 UTC Re: Homemade MPG