CAD CAM EDM DRO - Yahoo Group Archive

Re: Help to sart my CNC project please.....

on 2012-09-29 09:30:59 UTC
to learn, you should get a two simple drivers for motors.
find the amps of the drivers and get motors that will work with them.

read about power supplys at geckodrive.com they should have a white paper on power supplies. it will give you the basics.

get motors from any machine and make a simple device. you can learn about this for just a few dollars.

once you know what you want to do, cut wood, or wax, plastic or metal, and have a size of a part you are interested in doing, come back and let us know.

we will be happy to give you pointers on the power needed for different machines.

As for the software, there are a few free, but very limited packages for DOS and windows. Linux has more powerful stuff.

if turboCNC still has a free version, that is super simple and has a huge base for support.

Dave





--- In CAD_CAM_EDM_DRO@yahoogroups.com, "shambhusiwakoti" <shambhusiwakoti@...> wrote:
>
> I want to do the project about CNC machine, but I have not any proper instruction for that even to start. Mainly, about the controlling system and best motors for the simple one. Please help me for this....
>

Discussion Thread

shambhusiwakoti 2012-09-28 16:06:41 UTC Help to sart my CNC project please..... jeremy youngs 2012-09-29 09:25:35 UTC Re: [CAD_CAM_EDM_DRO] Help to sart my CNC project please..... turbulatordude 2012-09-29 09:30:59 UTC Re: Help to sart my CNC project please.....