CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Cheap drivers

Posted by Tony Smith
on 2012-10-02 09:02:26 UTC
> I received a modified one with a 3d printer kit. Works a treat. 20
minutes and 8
> jumpers (or so), yank the optos and we're away with an under-50.00 4-axis
3-
> amp driver. One
> *could* spend some more time rewiring the optos in properly, but why
bother?
> I've never lost a parallel port yet, in many years and many projects. BUT
only if
> I'm careful to turn things off before plugging and unplugging.


The breakout board (presuming you have one) will protect the port anyway
(although not all of them are opto-isolated).

Tony

Discussion Thread

Mark F c521 2012-10-02 07:22:38 UTC Cheap drivers Tony Smith 2012-10-02 09:02:26 UTC RE: [CAD_CAM_EDM_DRO] Cheap drivers