Re: [CAD_CAM_EDM_DRO] Puting light on the part
Posted by
Jon Elson
on 2013-03-31 08:55:57 UTC
Bob wrote:
I made some lights by cutting apart re-lampable CFDs and putting the lamp
in a piece of acrylic tube with a reflector made out of .020" aluminum
flashing, and finishing it with plumbing fittings. I used Loc-Line as
a gooseneck, and put the ballast in a box away from coolant and lubes.
Has worked well for 10+ years.
I'd probably do it with LED lights, now.
Jon
> Hi, I have some Mill and Lathe Lighting Ideas at my webpage at.Sure couldn't find it!
> http://www.cad2gcode.com/cncprojects
>
I made some lights by cutting apart re-lampable CFDs and putting the lamp
in a piece of acrylic tube with a reflector made out of .020" aluminum
flashing, and finishing it with plumbing fittings. I used Loc-Line as
a gooseneck, and put the ballast in a box away from coolant and lubes.
Has worked well for 10+ years.
I'd probably do it with LED lights, now.
Jon
Discussion Thread
Bob
2013-03-31 07:24:32 UTC
Puting light on the part
Jon Elson
2013-03-31 08:55:57 UTC
Re: [CAD_CAM_EDM_DRO] Puting light on the part
Vince Negrete
2013-03-31 11:02:43 UTC
Re: [CAD_CAM_EDM_DRO] Puting light on the part
Jon Elson
2013-03-31 12:49:43 UTC
Re: [CAD_CAM_EDM_DRO] Puting light on the part
Robert Adams
2013-04-01 07:26:49 UTC
Re: Puting light on the part