CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed

Posted by Nelson Collar
on 2017-02-02 11:28:29 UTC
Mark
you will need a drawing program to start and from there there are programs to create the cnc program. 



From: "pmark1@... [CAD_CAM_EDM_DRO]" <CAD_CAM_EDM_DRO@yahoogroups.com>
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Thursday, February 2, 2017 9:34 AM
Subject: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed

 
Would appreciate some assistance from Our Forum Family on what basics I need to do to get my machine setup to initiate a simple part or engraving to get started. First of all, I do have a complete CNC mill, controller, mach 3 and it does appear to be configured properly? This is sort of a sticking point for me. Would like to actually design a simple part to get familiar with the procedure involved. For example, I'm sure there have been many of you that started out that have been there and done that. Pretty new at this and would like to know how you proceeded to obtain get this cnc to work for you. Any an all suggestion would very much be appreciated. I really need a basic, step by step, hands on instructions for a newby. You may consider sending a PM if you prefer. Thanks very much for taking the time to assist with this matter. If I am out of line here please feel free to tell me where to go. PM


Discussion Thread

2017-02-02 06:34:38 UTC Easy CNC Guides Needed Nelson Collar 2017-02-02 11:28:29 UTC Re: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed 2017-02-02 19:43:14 UTC Re: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed Tony Smith 2017-02-03 03:06:58 UTC RE: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed Ron Thompson 2017-02-03 03:31:09 UTC Re: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed Dan Field 2017-02-03 11:16:47 UTC Re: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed Tony Smith 2017-02-03 11:26:46 UTC RE: [CAD_CAM_EDM_DRO] Easy CNC Guides Needed 2017-02-14 18:31:46 UTC Re: Easy CNC Guides Needed 2017-02-14 21:15:00 UTC Re: Easy CNC Guides Needed