Re: [CAD_CAM_EDM_DRO] prototype machining job

Elliot,
I will take a look at your pieces. We use Solidworks,AlphaCam and WorkNC. E-Drawings no problem.
Best Regards.
Neil George
954-572-5829

Elliot Burke wrote:

>
> I have a small prototype machining job that is beyond my abilities. There
> are about 10 part, 1 each. Most of them have complex geometry and need to
> be CNC'd. A few a lathe parts, the most complex are 3 or 4 axis mill parts.
> Material is 6061 for the milled parts, and a stainless for the lathe parts.
> Anyone out there want to take a crack at some or all the parts?
> I can email pictures of the parts, or eDrawings, or STEP files, or
> SolidWorks drawings, maybe ACIS or IGES, or DXF of the drawings... Pick yer
> poison.
> eDrawings are really the best way to go unless you can read the solid files
> directly. There is a free viewer that works with windows machines.
> If you haven't seen it, let me know and I'll mail anyone interested an
> eDrawing to look at.
>
> Elliot Burke
> elliot@...
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager