Re: [CAD_CAM_EDM_DRO] Dimensions of RF-45

Try this link:

http://www.penntoolco.com/catalog/temp_top_two.cfm?FamilyID=RF45

Jeff Ackerman wrote:

>
>
> I'm new to the list - found it through a web search while looking for
> information on the RF-45 mill. I see that several members of this list have
> this item.
>
> I'm seriously thinking of buying one of these in the next few weeks, but
> wanted to check a few things first as I'm going to be short on workshop
> space for the next 1 1/2 years until I move into a larger home.
>
> I was hoping that someone could take a few minutes and let me know a few
> things.
>
> I need to find out some dimensions of this machine that the ads don't
> provide. Specifically,
>
> 1) how high is this machine from the base to the top of the column?
>
> 2) how high from the base to the top of the machine when the head is raised
> to its maximum height?
>
> 3) how deep is the machine? (I need to get an idea of how far it comes
> away from a wall to both the end of the main part of the machine, and how
> much narrower it could be made if I remove the Y handle for storage).
>
> (I'm looking for dimensions without the optional cabinet - I need to be
> able to fit it under a shelf and be able to clear a door way)
>
> Thanks in advance
>
> Jeff
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager