CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder

Posted by Tim Goldstein
on 2000-09-05 15:51:33 UTC
Seems to me that if you have a 1/2 hp 10k rpm motor and run it through a 3:1
reduction you now have torque that is more equivalent to a 1-1/2 hp motor.
If this is so, than the 1/2 hp motor with no reduction will be weak.

Tim
[Denver, CO]

> Dan they are 1/2 hp

Discussion Thread

Dan Mauch 2000-09-05 07:03:46 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder marble here 2000-09-05 12:50:02 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder Dan Mauch 2000-09-05 14:03:38 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder marble here 2000-09-05 14:08:47 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder Tim Goldstein 2000-09-05 15:51:33 UTC RE: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder P.J. & Aimee Ritz 2000-09-05 19:58:41 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder Dan Mauch 2000-09-05 20:04:04 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder Jon Elson 2000-09-05 21:49:27 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder dave engvall 2000-09-05 22:39:18 UTC Re: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder Tim Goldstein 2000-09-06 17:47:47 UTC RE: [CAD_CAM_EDM_DRO] Dan's Toolpost grinder