Re: [CAD_CAM_EDM_DRO] Re:Lathe threading
Posted by
dave engvall
on 2000-09-08 14:42:10 UTC
ballendo@... wrote:
It might be worth a try. At least with one slot there is no question about the indexing of the spindle.
Dave
> Andrew, the way you describe this he has created a ONE SLOT encoder.Got an off-list e-mail the other day that said that Mazak did exactly this with 20" x 72 lathe using an optical sensor.
It might be worth a try. At least with one slot there is no question about the indexing of the spindle.
Dave
Discussion Thread
dave engvall
2000-09-08 14:42:10 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lathe threading
Darrell
2000-09-08 14:45:17 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lathe threading
James Owens
2000-09-08 17:37:47 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lathe threading
ptengin@a...
2000-09-09 13:01:23 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lathe threading
Ian Wright
2000-09-09 15:27:02 UTC
Re: [CAD_CAM_EDM_DRO] Re:Lathe threading