Lathe CNC Retrofit
Posted by
Bob Bachman
on 1999-07-03 21:23:26 UTC
Tim,
I'm interested in the mechanics involved with hanging steppers on a lathe.
I assume
the lead and crossfeed screws need to be replaced w/ballscrews, etc.
Anyone in the group done this?
Bob
I'm interested in the mechanics involved with hanging steppers on a lathe.
I assume
the lead and crossfeed screws need to be replaced w/ballscrews, etc.
Anyone in the group done this?
Bob
>
>I am running a Shoptask 3 in 1 machine converted to CNC and run it in both
>lathe and mill mode. I was using DeskNC which has mill and lathe specific
>modes, but now I am using EMC and just changed the setting in my CAM package
>to spit out the lathe code as X and Y instead of the conventional X and Z.
>That change along with a separate run, ini, and parameters table has it
>working just fine.
>
>
>Tim
Discussion Thread
Bob Bachman
1999-07-03 21:23:26 UTC
Lathe CNC Retrofit
Tim Goldstein
1999-07-03 19:48:46 UTC
Re: Lathe CNC Retrofit