Re: [CAD_CAM_EDM_DRO] Disposing of Cutting Oils
Posted by
dave engvall
on 2000-10-15 21:30:17 UTC
Hi,
You might try salt or freezing to kill the emulsion. If you can separate the stuff then burning the oil in a good burner may be an
option. The real trick is to separate the water. If you have unmixed stuff then it should blend with number one diesel (stove oil )
as in heating oil and can be disposed of that way. The emulsifier will also burn OK.
Dave
You might try salt or freezing to kill the emulsion. If you can separate the stuff then burning the oil in a good burner may be an
option. The real trick is to separate the water. If you have unmixed stuff then it should blend with number one diesel (stove oil )
as in heating oil and can be disposed of that way. The emulsifier will also burn OK.
Dave
Discussion Thread
Jerry Kimberlin
2000-10-15 08:56:29 UTC
Re: [CAD_CAM_EDM_DRO] Disposing of Cutting Oils
dave engvall
2000-10-15 21:30:17 UTC
Re: [CAD_CAM_EDM_DRO] Disposing of Cutting Oils