CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re[2]: digitising arm

Posted by dave engvall
on 2000-11-16 08:00:41 UTC
Ian Wright wrote:

> Then we could use the Xtal as the
> resonant element in a simple oscillator and monitor the change in frequency
> as the Xtal deformed under side loading and have a logic circuit to trigger
> at a certain deviation thus indicating contact with the surface. In
> principle it looks as though this could be very accurate as a very small
> change in frequency could be detected.

I think you are going to get a few pf change from capacitive coupling to the object as you approach it. If this really happens
then it might be a very sensitive probe.

Dave

Discussion Thread

Ray 2000-11-15 06:55:19 UTC Re[2]: digitising arm Alan Marconett KM6VV 2000-11-15 11:11:00 UTC Re[2]: digitising arm ballendo@y... 2000-11-15 15:37:05 UTC Re[2]: digitising arm ballendo@y... 2000-11-15 19:54:25 UTC Re[2]: digitising arm Jon Elson 2000-11-15 22:25:37 UTC Re: [CAD_CAM_EDM_DRO] Re[2]: digitising arm Alan Marconett KM6VV 2000-11-16 00:03:01 UTC Re: [CAD_CAM_EDM_DRO] Re[2]: digitising arm Alan Marconett KM6VV 2000-11-16 00:33:38 UTC Re[2]: digitising arm Ian Wright 2000-11-16 02:26:25 UTC Re: [CAD_CAM_EDM_DRO] Re[2]: digitising arm dave engvall 2000-11-16 08:00:41 UTC Re: [CAD_CAM_EDM_DRO] Re[2]: digitising arm ballendo@y... 2000-11-16 13:13:26 UTC Re: Re[2]: digitising arm Anne Ogborn 2000-11-16 16:56:30 UTC Re: [CAD_CAM_EDM_DRO] Re[2]: digitising arm