CAD CAM EDM DRO - Yahoo Group Archive

Re: Gcode MM to Inch conversion program

Posted by Robert
on 2000-12-10 07:40:11 UTC
Well, this is great, I missed the first responses on my question. Let me
try that code in my limited controller software. And thanks, BTW, the G Code
programs are output from a BMP to G program and MM is all I see it does.


Message: 12
From: cnc002@... replied to

Jon:

I was thinking the same as you, all of the CNC controls and G-code
interpreters that I have ever used will accept either MM or Inches by just
using the proper G-code command such as G70 or G71, and there are a few
others on different controls but they all still do this, at least the ones I
have used.

Randy A.

Discussion Thread

cncrouterusa@n... 2000-12-07 23:14:21 UTC Gcode MM to Inch conversion program Jon Elson 2000-12-08 11:19:12 UTC Re: [CAD_CAM_EDM_DRO] Gcode MM to Inch conversion program cnc002@a... 2000-12-09 17:40:25 UTC Re: [CAD_CAM_EDM_DRO] Gcode MM to Inch conversion program ballendo@y... 2000-12-09 18:31:01 UTC Re: Gcode MM to Inch conversion program Robert 2000-12-10 07:40:11 UTC Re: Gcode MM to Inch conversion program