CAD CAM EDM DRO - Yahoo Group Archive

cybermat /Arago robotics

Posted by lpwerner@m...
on 2000-12-12 00:24:16 UTC
I would like to know if anyone out there has ever heard of this
outfit they made a xy table and controller device in 1993-95 out of
the Univ of Idaho and based out of moscow Idaho I have 2 tables
complete with software but cant get the things to work. A brief on
the tables, 13 were built I've been told ,of which I have heard of
only one in operation cause it was retrofitted by a good EE operator.
The machine ran from a 486/66pc via 3 wires from the 9pin port rs232
to the control card which uses a Intel N87C196KD20 proccessor chip.
Not to many folks used this bad boy so I,ve been told but if anyone
who reads this.and knows of any links in my quest please send me on
to the source. I,ve probably got a very simple line of in fo
screwwed up on my computer but now it no workie so now I'm looking
for all the help I can find. Its only 11:25pm Alaska time did
everyone down in america go to sleep already. Thanx to all who read
this. Luke

Discussion Thread

lpwerner@m... 2000-12-12 00:24:16 UTC cybermat /Arago robotics Brian Pitt 2000-12-12 01:20:49 UTC Re: [CAD_CAM_EDM_DRO] cybermat /Arago robotics