Re: [CAD_CAM_EDM_DRO] Monitor/CPU in same case, problems?

Jon,

I don't have an Apple, but it seems they put it all in one case! Peek
into one and see if they mount things similar to what you want!

Stay away from the BIG RED WIRE!

And keep the dust attracted by the HV out of the box! Dress the drive
cables along the chassis floor, away from the 15,750 hz Horz. osc
stuff! That's the only thing I can think of!

Good luck!

Alan KM6VV

Jon Anderson wrote:

>
> As I mentioned in a previous post, I bought a Xycom terminal to
> integrate as my CNC interface. I gave up on putting a flat panel in
> it, just too expensive. So I'll go back to stuffing a 13" SVGA monitor
> and electronics into the case. Now, I think I have room to place a
> motherboard, floppy, and HD into this case also. What I'm asking about
> is, will I run into trouble with the high voltages emitting something
> that even -might- interfere with the CPU, HD, etc?
> It's no real big deal if I have to have a separate box for the computer,
> I just hate to waste all this space...
>
> Thanks,
>
> Jon