Re: [CAD_CAM_EDM_DRO] Re: lubricants
Posted by
Jon Elson
on 2000-12-15 23:31:42 UTC
ballendo@... wrote:
I remember one about a punch press that went something like :
The foreman used to have us cut the 1.5" nuts off the platen with a torch.
Then, we tried Kroil, and 5 minutes later we took the nuts off with our
fingers! This, I'd like to see!
But, I'm glad to know that at least their product is very good.
Jon
> Smoke wrote:Good to hear it. Their claims were awfully hard to believe!
> >Would you believe...the lube instructions that came with my high
> >speed air grinder says to squirt WD-40 in the end at least once a
> >day or every eight hours while in use?
>
> Smoke,
>
> I'd believe it, but I'd probably use KROIL instead. It's a product of
> Kano industries, in Nashville, Tennessee.
>
> I first read the 'snake oil' claims of kano many years back. Finally,
> in a weak moment, I tried a 30 day money back 'deal'. I've been
> converted... Used to be, I could only buy direct. Now I'm seeing the
> familiar orange aerosol and pint/quart/gallon can(s) on industrial
> distributor shelves.
>
> Kano makes some other 'snake oils'. I've tried two, and they also
> live up to the claims...
I remember one about a punch press that went something like :
The foreman used to have us cut the 1.5" nuts off the platen with a torch.
Then, we tried Kroil, and 5 minutes later we took the nuts off with our
fingers! This, I'd like to see!
But, I'm glad to know that at least their product is very good.
Jon