Re: [CAD_CAM_EDM_DRO] Servo torque test question
Posted by
Jon Elson
on 2001-01-11 16:35:57 UTC
Robert Allen & Marsha Camp wrote:
average, usually called RMS maximum power, or thereabouts.
on Z.
Jon
> Jon,My servo amps have a hard limit. Some amps have both hard limit and a long time
> This is great info and helps my servo project along greatly, thank you.
> Do the servo amps limit to no more than the set point or is it a continuous average, and if so what is the peak amperage?
average, usually called RMS maximum power, or thereabouts.
> Are you using 5 tpi lead screws?Yes, 5 TPI on X and Y, and 10 TPI on Z.
> What size timing belts are you using?I/m using the 3/8" .200 pitch belts on X and Y, and a 1/4" .080" pitch, I think,
on Z.
Jon
Discussion Thread
Robert Allen & Marsha Camp
2001-01-08 20:02:21 UTC
Servo torque test question
Mariss Freimanis
2001-01-08 21:55:00 UTC
Re: Servo torque test question
Jon Elson
2001-01-08 23:55:14 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Les Watts
2001-01-09 09:43:09 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Robert Allen & Marsha Camp
2001-01-09 19:54:58 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Jon Elson
2001-01-09 22:57:57 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Robert Allen & Marsha Camp
2001-01-10 16:47:09 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Jon Elson
2001-01-10 22:38:38 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Robert Allen & Marsha Camp
2001-01-11 15:37:12 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question
Jon Elson
2001-01-11 16:35:57 UTC
Re: [CAD_CAM_EDM_DRO] Servo torque test question