Re: [CAD_CAM_EDM_DRO] Re: Taig retrofit servo motors

1440 RPM gives 72 IPM
Dan
-----Original Message-----
From: Roman Black <fastvid@...>
To: CAD_CAM_EDM_DRO@egroups.com <CAD_CAM_EDM_DRO@egroups.com>
Date: Friday, January 12, 2001 6:55 AM
Subject: [CAD_CAM_EDM_DRO] Re: Taig retrofit servo motors

>--- In CAD_CAM_EDM_DRO@egroups.com, "Dan Mauch" <dmauch@s...> wrote:
>> Some time in early December I posted on the Sherline group my
>> experience at putting a servo motor on a Sherline. I mentioned that
>it was
>> running the X axis at 72 IPM at 25 lbs. force using a gecko drive
>and a
>> small servo motor that I adapted to my nema 23 extrusions on the
>sherline.
>
>Dan, do you mind me asking, what rpm to get the
>sherline X axis doing 72 ipm? I'm currently working
>on a stepper driver to give very high speeds,
>and it would be nice to know what speeds people
>expect from servo systems in different apps.
>-Roman
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@egroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
>List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
>Moderator: jmelson@... [Moderator]
>URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
>FAQ: http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>