Just Starting Out
Posted by
gladiator3600@y...
on 2001-02-01 16:53:11 UTC
Hello Everyone
I am just starting out to learn about CNC routers and would like
some suggestions on what is the best way to go about it . I have been
to the sites that sell CNC equipment and have a good idea of what is
involved .
My motivation for this project of building a CNC router is that I
am a violin maker and would like to someday be able to arch violin
plates . I own my own metal lathe and I am in the process of buying a
milling machine .
I have some experience with linear bearings but none with stepper
or servo motors .
Any suggestions would be greatly appreciated !
Thank You
I am just starting out to learn about CNC routers and would like
some suggestions on what is the best way to go about it . I have been
to the sites that sell CNC equipment and have a good idea of what is
involved .
My motivation for this project of building a CNC router is that I
am a violin maker and would like to someday be able to arch violin
plates . I own my own metal lathe and I am in the process of buying a
milling machine .
I have some experience with linear bearings but none with stepper
or servo motors .
Any suggestions would be greatly appreciated !
Thank You
Discussion Thread
gladiator3600@y...
2001-02-01 16:53:11 UTC
Just Starting Out
Les Watts
2001-02-01 18:52:02 UTC
Re: [CAD_CAM_EDM_DRO] Just Starting Out
Robert Allen & Marsha Camp
2001-02-01 19:10:38 UTC
Re: [CAD_CAM_EDM_DRO] Just Starting Out
Marcus & Eva
2001-02-01 20:59:41 UTC
Re: [CAD_CAM_EDM_DRO] Just Starting Out
ballendo@y...
2001-02-02 06:02:58 UTC
Re: Just Starting Out