CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Newbie questions

Posted by Dan Mauch
on 2001-02-03 10:37:44 UTC
You may want to look at my motor mounts that I used on my mill/drill. They
are rectangular tubing that provides for a belt guard and mounting to the
machine ( sorry no drawings). I used that for both stepper motors and servo
motors. See my web page at www.seanet.com/~dmauch look at the Images. I
believe it is the last one. I have the mill drill running at 180 IPM using a
2/1 ratio XL series timing belt and pulleys. I have converted it to
ballscrews and servos. I get 180 IPM with Maxnc on a 486-66 .
I am most proud of solving the mil/drill quill backlash problem without
having to put an external ballscrew on the quill. My x-y axis have about
.002 backlash and the last time I checked it the quill had .0019 backlash.
I was going to come out with a retrofit kit for the XY conversion to
ballscrews and the quill fix but there was only one or two guys interested.
So I drop the project.
Dan
-----Original Message-----

>2. Dan Mauch at Camtronics http://www.seanet.com/~dmauch/ has dc motors
with
>encoders for $100 ea.
>
>I have adaptor designs ( cad layouts, not perfect, correct detail
drawings )
>for the x and y axis that I would be happy to share, and the z axis is in
>process ( I know how I intend to accomplish it, but don't know if my
>intentions will work)
>
>Andy Olney
>
>-----Original Message-----
>From: The Sheppard Residence [mailto:peter@...]
>Sent: Saturday, February 03, 2001 6:40 AM
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: [CAD_CAM_EDM_DRO] Newbie questions
>
>
>Hello,
>
>I am new to this list, but I do have a presence on Livesteamers and
>Modeleng-list.
>
>I have a Warco A1S mill and a desire to look at ways of automating the
>process of milling.
>
>I have an amount of computer knowledge and a rough idea of CAM. (Although I
>know that a little knowledge is a dangerous thing :-)
>
>My son is into computers into a big way and I am sure he can help with the
>programming. I have hardware/electronic knowledge.
>
>I am a model engineer, so finding ways of attaching bits and pieces to my
>mill "shouldn't" be too difficult.
>
>To start with, some very simple questions.
>
>What sort of size stepper motors will I need to drive the axes? As well as
>physical size, I'm interested in the power or current/phase. The A1S is
a
>large mill (total weight of approx. 1/2 ton) but I won't be taking large or
>heavy cuts.
>
>What's the difference between a 4 wire and 6 wire (apart from 2 wires?)
>
>What resolution of control (in degrees?) do I need?
>
>What circuits do I need to drive these motors. I have seen information
>about driving steppers from the parallel port and "DANCAD?" software.
>
>Sorry for all the questions.
>
>Cheers
>
>Peter
>
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>

Discussion Thread

The Sheppard Residence 2001-02-03 06:42:23 UTC Newbie questions wanliker@a... 2001-02-03 07:59:30 UTC Re: [CAD_CAM_EDM_DRO] Newbie questions wbhinkle@a... 2001-02-03 08:33:48 UTC Re: [CAD_CAM_EDM_DRO] Newbie questions Andy Olney 2001-02-03 10:07:07 UTC RE: [CAD_CAM_EDM_DRO] Newbie questions Dan Mauch 2001-02-03 10:37:44 UTC Re: [CAD_CAM_EDM_DRO] Newbie questions Tim Goldstein 2001-02-03 11:58:40 UTC RE: [CAD_CAM_EDM_DRO] Newbie questions A. G. Eckstein 2001-02-03 13:37:27 UTC Re: [CAD_CAM_EDM_DRO] Newbie questions