Re: Sherline Z backlash Nut/fix

sorry smoke! my fault! and yes it is getting closer to valentines
hehehe! sorry.
tauseef

--- In CAD_CAM_EDM_DRO@y..., "Smoke" <gordonr@r...> wrote:
> Can anyone tell me why I'm getting this post from tauseef so many
times?
>
> I've gotten it about 8 times already!
>
> Smoke
> -----Original Message-----
> From: tauseef <alieron@h...>
> To: CAD_CAM_EDM_DRO@y... <CAD_CAM_EDM_DRO@y...>
> Date: Friday, February 09, 2001 3:28 PM
> Subject: [CAD_CAM_EDM_DRO] Sherline Z backlash Nut/fix
>
>
> >Hey guys,
> >I found my z axis to have a whopping 0.26mm of backlash in it!
After
> >some thinking this is how I fixed the problem. Not sure if this is
> >the "best" way but it works well.
> >
> >I used the Z axis lock (came with the mauel mill) that they tell
you
> >not to use when converting to CNC. I tapped it, then turned it so
it
> >almost locks the axis (taking out the backlash) and then put a
braket
> >to hold it there. My backlash on my sherline 5410 went from 0.26mm
to
> >0.07mm! I also made the hole a little longer as to make the
backlash
> >nut adjustable as everything wears down. I put a pic up case anyone
> >wants to see and try it. Its under BACKLASH.
> >
> >http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Tauseef%20Pics/
> >
> >So far excellent results!
> >thanks
> >tauseef
> >
> >
> >
> >
> >Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> >Addresses:
> >Post message: CAD_CAM_EDM_DRO@y...
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> >List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> >Moderator: jmelson@a... timg@k... [Moderator]
> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Manager
> >
> >FAQ: http://www.ktmarketing.com/faq.html
> >
> >