Re: [CAD_CAM_EDM_DRO] Sherline Z backlash Nut/fix
Posted by
Smoke
on 2001-02-09 14:36:34 UTC
Can anyone tell me why I'm getting this post from tauseef so many times?
I've gotten it about 8 times already!
Smoke
-----Original Message-----
From: tauseef <alieron@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Friday, February 09, 2001 3:28 PM
Subject: [CAD_CAM_EDM_DRO] Sherline Z backlash Nut/fix
I've gotten it about 8 times already!
Smoke
-----Original Message-----
From: tauseef <alieron@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Friday, February 09, 2001 3:28 PM
Subject: [CAD_CAM_EDM_DRO] Sherline Z backlash Nut/fix
>Hey guys,discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>I found my z axis to have a whopping 0.26mm of backlash in it! After
>some thinking this is how I fixed the problem. Not sure if this is
>the "best" way but it works well.
>
>I used the Z axis lock (came with the mauel mill) that they tell you
>not to use when converting to CNC. I tapped it, then turned it so it
>almost locks the axis (taking out the backlash) and then put a braket
>to hold it there. My backlash on my sherline 5410 went from 0.26mm to
>0.07mm! I also made the hole a little longer as to make the backlash
>nut adjustable as everything wears down. I put a pic up case anyone
>wants to see and try it. Its under BACKLASH.
>
>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Tauseef%20Pics/
>
>So far excellent results!
>thanks
>tauseef
>
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>
Discussion Thread
tauseef
2001-02-09 13:29:34 UTC
Sherline Z backlash Nut/fix
Smoke
2001-02-09 14:36:34 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Z backlash Nut/fix
machines@n...
2001-02-09 15:53:05 UTC
Re: Sherline Z backlash Nut/fix
tauseef
2001-02-09 16:41:25 UTC
Re: Sherline Z backlash Nut/fix