Re: [CAD_CAM_EDM_DRO] tuning a thread on a lathe
Posted by
Rich D.
on 2001-02-28 16:29:02 UTC
John,
I scanned a threading chart and put it in the "Files" area of this list:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
It's from a well known manual ;o)
Enjoy, Rich D.
marble_h@... wrote:
-==Rich=-=Colorado Midland Railway=-=<http://www.geocities.com/cmsteam/>
I scanned a threading chart and put it in the "Files" area of this list:
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
It's from a well known manual ;o)
Enjoy, Rich D.
marble_h@... wrote:
>--
> Hi group would someone by anychance have a chart on the depth of the
> thread for NC and Nf threads .I lost my book
>
> thanks group
>
> John
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-==Rich=-=Colorado Midland Railway=-=<http://www.geocities.com/cmsteam/>
Discussion Thread
marble_h@y...
2001-02-28 13:34:20 UTC
tuning a thread on a lathe
Rich D.
2001-02-28 16:29:02 UTC
Re: [CAD_CAM_EDM_DRO] tuning a thread on a lathe
marble_h@y...
2001-02-28 17:35:06 UTC
Re: tuning a thread on a lathe